Plasma cutter GUDE GPS-E 40 A.2

High-frequency plasma cutter 15 - 40 A, for cutting material with a maximum thickness of 12 mm. When combined with a compressor with a minimum flow rate of 150 liters per minute, it is possible to effortlessly and quickly cut sheets and steel. It is also possible to process other materials such as aluminum, copper, brass, or stainless steel, even by manual cutting. For the creative home and hobby craftsman, this plasma cutter offers many possibilities for use in all forms. Compatible with pantograph 20068. Using a suitable template, creative shapes can be copied and cut from a paper template or sheet template. Pressure reduction device with pressure gauge, compressed air supply, and water separator, grounding cable with a 9 mm connector, two sets of spare nozzles included.

Mains voltage: 230 V
Frequency: 50 Hz
Protection class (IP): 21 S
Insulation class: H
Maximum power in a 230 V network: 5.79 kVA
Network fuse: 16 A
Voltage at no-load operation: 270 V
Maximum welding current in a 230 V network: 15 - 40 A
Duty cycle at maximum welding current in a 230 V network: 40 ~ 20 A ~ %
Recommended material thickness: max. 12 mm
Cutting torch hose: 2.5 m
Dimensions (LxWxH): 407 x 142 x 286 mm
Net/gross weight: 6.2 kg/8.6 kg