Three-phase electric generator HECHT GG 10000

Benefits

• three-phase electricity generator
• 4-stroke single-cylinder air-cooled engine
• 2x 230V socket, 1x 400V three-phase socket, 1x 12V DC socket
• key ignition (including manual start option with a pull cord)
• digital voltmeter
• equipped with large wheels and a folding handle for easy transport and handling
• high-quality alternator
• includes AVR (Automatic Voltage Regulation)
• protection against overload and oil deficiency
• metal 25-liter fuel tank resistant to mechanical damage
• tank capacity allows for 8 hours of operation with a full tank
• provides uncompromising power where needed

HECHT GG 10000 is a relatively quiet and stable electricity generator. It is equipped with two standard 230V/50 Hz sockets and one 400V/50 Hz three-phase socket. The panel also features a 12V DC output, which can be used, for example, for charging lead-acid batteries. The two 230V sockets can be used for powering standard single-phase appliances, while the 400V three-phase socket is primarily used for devices with powerful three-phase motors. The generator can deliver power of up to 8500 W for short periods (e.g., motor startups), while the continuous power output is 7500 W. It is equipped with AVR regulation (Automatic Voltage Regulation) to prevent voltage fluctuations under load changes.

The generator features an electric starter, allowing for ignition by turning the key in the ignition switch, similar to a car. In case of a discharged battery, there is also a manual starting option using a pull cord.

The unit is housed in a frame made of steel tubes, equipped with transport wheels and a folding handle. This design makes it easy to handle the 102 kg machine. These specifications make the unit suitable as a power source for construction sites and as a backup power supply for electric components such as some solid fuel boilers, among others.

The output voltage characteristics of the generator differ from those of a standard electrical network. Therefore, it is advisable to consult with the manufacturer or seller regarding the power supply options, especially for sensitive electronic devices (e.g., computers, modern TVs, etc.). Some electrical devices may temporarily draw several times the normal operating current, especially devices like electric motors and others utilizing induction, which can exceed three times the normal power consumption. A starting coefficient can be used for calculation, where the normal power consumption of the connected device is multiplied by this coefficient. For instance, a coefficient of 1 is applied to devices like hair dryers, hot air guns, fryers, mixers, ovens, irons, sandwich makers, vacuum cleaners, and desk lamps. A coefficient of 2 usually applies to electric lawnmowers, angle grinders, hedge trimmers, electric saws, washing machines, etc. Compressors, pressure washers, concrete mixers typically have a coefficient of 3, while refrigerators, freezers, or air conditioners may even exceed this value. As an example, a device with a power consumption of 600 W and a coefficient of 2 would require a generator with a minimum power output of 1200 W.